Plumbing & Drain Cleaning Services in Toledo, OH (2024)

FAQs

How much does it cost to unclog a bathroom drain? ›

How much would a plumber charge to snake a drain? On average, expect to pay between $125 and $250 to hire a professional plumber to clear clogs in the bathroom, shower, or bathroom. For more difficult clogs in toilets and by the laundry line, expect to pay between $225 to $300.

The average cost to snake a sewer line runs about $275. To clear a sewer line clog, expect to pay from $100 to $700 or more for tough clogs. The project can cost $100 at the low end and over $1,000 on the high end for clogs presenting a challenge to access or requiring excavation.

Baking soda, vinegar and boiling water can help clean drains naturally, but you may need something stronger, like Liquid-Plumr, to fully unclog those really tough drain clogs.

In addition to cleaning from a pro once per year, keep your drains clean with a weekly and monthly maintenance routine. This maintenance will greatly limit the risk of blockages and damage to plumbing drain pipes throughout your house, as well as buried sewer lines outdoors.

How much does Roto-Rooter cost to unclog a drain? To unclog a sewer main line, Roto-Rooter will range from $350 to $450. Unclogging a smaller line like a drain to a toilet, tub or shower, will similarly cost around $325 to $450, depending on the cause of the clog and the extent of the damage the clog has caused.

The duration of drain cleaning service is depending several factors like the severity of the clog, the type of plumbing system, and the methods employed. Normally, it takes 30 mins to 1 hour to use some basic tools and chemicals. But for more complex blockage, it can take a few hours to a day.

First, you can run hot water down the drain for 5 to 10 minutes to see if that helps break up the clog. If it doesn't, pour equal parts of vinegar and baking soda into a bowl and then pour that mixture down the drain. Let it sit for 15 minutes, and then run hot water down the drain.

Clearing a clogged sewer line can take an hour to a few hours, depending on the blockage. If your lines are severely blocked, a video inspection and more advanced techniques may be necessary to find and address the clog.

The drain relining cost, restoring your pipes' structural integrity in the process, can be as little as £70 per linear metre.

If your drain is clogged with hair, baking soda can dissolve hair in a drain. To try this safe and easy method at home – first, pour a cup of baking soda down the drain. Then pour a cup of vinegar (white vinegar) down. Allow the mixture to sit for several minutes.

What does vinegar do to drains? ›

A completely clogged drain will require the help of a professional plumber, but baking soda and vinegar might be a quick fix for a partially clogged drain. This solution will dissolve and push the sludge through the pipes to allow water to flow through easily. Let hot water run for a minute to warm up the pipes.

The magic of salt lies in its ability to absorb moisture. When poured down the drain, it attracts and absorbs water particles in the pipe setting off a chemical reaction that can dislodge minor clogs. It's safe, cost-effective, and eco-friendly – everything a home owner desires.

The best time to clean drain pipes is in the autumn, winter or early spring.

The chemicals in the product are designed to break own the clog, but if left for too long, they can start to break down the pipes themselves. This can lead to cracks and leaks in the pipes, leading to various issues, including water damage and flooding.

Left unchecked, a clogged drain can lead to a variety of plumbing problems, from reduced water pressure to flooding and sewage backups. A clog that is not addressed may also cause long-term damage to pipes due to the accumulation of waste.

Start by pouring a kettle full of boiling water down the drain to loosen any grease around the blockage. Now pour down two tablespoons of baking soda and leave it to settle on the blockage for several minutes. Finally, pour a cup of white vinegar down and let the fizzing reaction work its magic for five minutes.

Baking Soda, Vinegar, and Water Pressure

If the bath drain is blocked, you can unclog a drain pipe with a mixture of baking soda and vinegar. You also need a plunger and the drain snake depending on the nature of the clog. Mix baking soda and vinegar in the ratio of 1:2 and add the mixture in 60 gallons of water.

Plumbers choose hydro jetting equipment for the most stubborn, deep-set clogs. This drain clearing tool uses high-pressure water to flush your pipes and remove years of buildup. The water jet is so strong that it can even break up any tree roots that have found their way into your sewer line.